What is the maximum number of Bus Terminals that can be connected to the controller?
The controller can support up to 64 Bus Terminals.
What are the maximum input and output bytes for the fieldbus?
The maximum number of bytes for the fieldbus is 512 bytes input and 512 bytes output.
What data transfer rates does the controller support?
The controller supports data transfer rates of 10/100 Mbaud, with automatic recognition of the transmission rate.
What is the power supply requirement for the controller?
The controller requires a 24 V DC power supply, with a tolerance of -15% to +20%.
What is the input current and recommended fuse for the controller?
The input current is 70 mA + (total K-bus current)/4, with a maximum of 500 mA. A recommended fuse is not specified in the datasheet.
What programming languages are supported by the controller?
The controller supports IEC 61131-3 programming languages, which include IL, LD, FBD, SFC, and ST.
What is the PLC cycle time for the controller?
The PLC cycle time is approximately 1.5 ms for 1,000 instructions, without considering the I/O cycle and K-bus.
Can the controller be programmed via Ethernet?
Yes, the controller can be programmed using TwinCAT via Ethernet or the programming interface.
What protocols does the controller support?
The controller supports TwinCAT ADS and Modbus TCP protocols.
Is it possible to configure the controller using KS2000?
Yes, the controller can be configured using KS2000 or via Ethernet.